Home / IoT Device Development

IoT Services

IoT device development: hardware, firmware & cloud.

We build connected devices end to end: a custom PCB around ESP32 or STM32, the right wireless link, reliable firmware with over-the-air updates, and a dashboard you can check from your phone.

What we build

IoT solutions

Custom IoT devices

Purpose-built hardware for your product or site.

  • Custom PCB on ESP32 / STM32
  • Battery, Li-ion BMS or solar powered
  • Rugged IP67 enclosures
  • Prototype to production batches

Industrial IoT & monitoring

Live data from machines, tanks and meters.

  • Tank level, flow and pressure monitoring
  • Energy and temperature monitoring
  • Modbus RS-485, 4–20 mA, pulse inputs
  • Alarms by app, SMS or email

Firmware & cloud

The software that makes your device useful.

  • Embedded C/C++, low-power firmware
  • Over-the-air (OTA) updates
  • MQTT / HTTP cloud connectivity
  • Dashboards, data logs and alerts

Technology

Our IoT technology stack

MicrocontrollersESP32 family, STM32; Raspberry Pi for gateway and edge use
ConnectivityWi-Fi, Bluetooth Low Energy (BLE), LoRa, 4G LTE / cellular
Industrial interfacesModbus RTU over RS-485, 4–20 mA, pulse, digital I/O, I²C / SPI / UART sensors
PowerMains, battery, Li-ion with BMS, solar charging, deep-sleep low-power design
FirmwareEmbedded C/C++, OTA updates, watchdog and fail-safe recovery
CloudMQTT / HTTP(S), dashboards, data logging, threshold alerts
HardwareCustom PCB design and assembly in-house; see PCB services

Process

From idea to deployed device

01

Requirements

What to measure or control, where it runs, how it's powered.

02

Hardware

Schematic, PCB layout and enclosure.

03

Firmware

Sensors, connectivity and power management.

04

Cloud

Dashboard, data logging and alerts.

05

Pilot & scale

Field trial, fixes over OTA, then production.

FAQ

IoT questions, answered

Can you build a complete IoT product from just an idea?

Yes. We handle the full chain: requirements, PCB and hardware design, firmware, cloud dashboard, enclosure and testing, so you get a working device rather than separate parts.

Which microcontrollers and connectivity do you use?

Mainly ESP32 and STM32. For connectivity we use Wi-Fi, Bluetooth Low Energy, LoRa and 4G LTE, chosen by range, power and where the device will be installed.

Can the device connect to industrial sensors?

Yes. We design interfaces for Modbus RTU over RS-485, 4-20 mA and pulse outputs, so the device can read flowmeters, level sensors, energy meters and other industrial instruments.

Can firmware be updated after installation?

Yes. Our devices support over-the-air (OTA) firmware updates, so fixes and new features can be pushed remotely without visiting the site.

Do you provide the dashboard and mobile access?

Yes. Data is sent over MQTT or HTTP to a cloud dashboard you can open on a phone or computer, with data logging and alerts when values go out of range.

How much does a custom IoT device cost?

It depends on sensors, connectivity, enclosure and quantity. Share your requirement and we will send a quote covering prototype and production pricing.

Have an IoT idea?

Tell us what you want to monitor or control. We reply within one working day. Call +91 88503 64608.